- What size (diameters) are available?
- What materials/colors are available?
- Can I build it myself?
- Can I paint the dome?
- Can I specify a custom size dome?
- Does it attach to a sub frame?
- How do I attach it to my structure?
- How are they shipped?
- Are they weatherproof?
- Can I insulate a dome roof?
- What is the wind and snow load rating?
- Where are the domes manufactured?
We manufacture domes with diameters of 8' 0" to 34' 0".
Acrylic coated Galvalume known as Galvalume Plus and over 20 colors in flurocarbon (Kynar) coatings. Also available in Architectural Grade Copper, 20 ounce 1/2 to 3/4 hard.
Anyone with a little common knowledge of construction and a few simple tools can assemble a Lancaster Dome.
Yes. You can paint our basic white material with proper preparation. However, we can manufacture a dome from a choice of more than 20 Kynar Coatings and custom colors.
Yes you can. Just give us the required outside diameter and centerline height.
No, the roof does not attach to a sub frame. It is self supporting and attaches to a circular wall plate.
You simply need to provide a circular wall plate to receive and support the roof. We will supply an anchor best suited for the structure.
The roofs are made up of individual pie shaped wedges that are bundled, packaged and crated for shipment by commercial carrier to the location of your choice.
Domes can be weather proofed by the installer by applying a clear caulk at each rib and or a foam weather strip between the rib joints and roof cap.
A sprayed on foam insulation can be used but the preferred method is to place a slightly smaller dome under the main dome. This allows room for insulation, wiring, etc along with an interior view of the roof.
While no specific load ratings are available, this style of dome roof has been manufactured for more than 50 years. Hundreds of domes have been installed in heavy snow country, such as upper Minnesota and Quebec. In high wind areas, we recommend and have available inconspicuous wind reinforcing rings.
The domes are made in our facility in Lancaster County, PA. Competent professionals can help you with design, application and manufacturing of your required dome roof.
CONTACT US | QUOTATION REQUEST
© 2006 Lancaster Domes
Exclusively by Lancaster Level-Flo, Inc.
25 Eby Chiques Road - Mount Joy, PA 17552
Phone: 717.653.2239 - Fax: 717.653.9806
